Home > Electrotherapy Ultrasound > Lasers >

Mettler Laser Sys*Stim(r) 540
Mettler Laser Sys*Stim(r) 540


 

Our Price: $3,995.00


Product Code:
LASER-SYSSTIMR-540


Choose Add-Ons:


Qty:  
Description Extended Information
 

Mettler Electronics Laser Sys*Stim(r) 540 MET328 **--Must Be Licensed HealthCare Professional To Order



  • Comes with a 785-nm laser probe with visible blue LEDs that illuminate the treatment field
  • Optional SLD/LED cluster probe with 95- nm SLDs and 660-nm LEDs is also available
  • The control unit allows the clinician to set treatment time, continuous/pulse modulation modes and laser output energy
  • In addition,ten user-defined programs are available for fast and easy treatment setup
  • All treatment parameters are displayed on the LED screen and controlled via the membrane keypad
  • Holders integrated into the unit store applicators when not in use
  • Laser output can also be adjusted via controls on the both laser and cluster applicators
  • Each Laser Sys*Stim 540 comes with a battery so you can take light therapy with you on the road
  • A built-in sensor allows you to check the laser output to verify that it's working
Includes: Comes with one 785-nm laser applicator, two pairs of protective Uvex glasses, power cord and instructions Click to View: Laser Sys*Stim 540 Brochure

Specifications:

Laser Performance: Output power:
Laser diode applicator 80 mW at 785nm
Optional cluster applicator 500 mW at 660/950nm
Delivered energy: 0.01 to 99.99 Joules
Operation modes: Continuous and Pulsed

Pulse mode:
Pulse width:
Laser: 100 's nominal
Cluster: 50% duty cycle

Pulse frequency:
A) Continuous
B) 10 Hz, 25 Hz, 50 Hz, 100 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 5 kHz
C) Sweep from 10 to 5 kHz
Timer 0 to 99 minutes 59 seconds
Laser Applicator Specifications:

Wavelength: 785 nm
Power: 80 mW
Treatment area illumination: Th ree blue LED's (470 nm)
Output activation: Capacitance switch on applicator handle
Beam spot: Elliptical beam spot 2.8 mm x 1.1 mm (elliptical beam area of = 9.2 mm) at the aperture.
Divergence: Elliptical beam divergence 18 degrees and 7 degrees
Eye protection: Uvex glasses with a minimum of 80% attenuation in the wavelength range of 780 nm to 860 nm. Th e Uvex glasses supplied with the unit meet these requirements.
General Information:
Voltage: 110 to 240 Volts AC
Frequency: 50/60 Hz
Power: Less than 150 VA
Battery: Sealed lead acid, 12 Volt, 0.8 AH
Operation time on battery: Greater than 30 minutes
International standards: EN60601-1 1990 EN60601-2-22 1996
Dimensions: 9.4 in. (W) x 4.7 in. (H) x 9.4 in. (D)
Weight: 5.5 lbs.
Laser output meter: Infrared photo sensor integrated into the top panel.